How to Open Jeep Cherokee Hood

How to Open Jeep Cherokee Hood – 4 Easy steps

If you are a proud owner of a Jeep Cherokee, it’s important to know how to pop open the hood of the vehicle and access the engine compartment. This allows you to inspect the internal components inside in case of a problem and fix or replace any if needed.

So, how to open Jeep Cherokee hood? In this guide, we’re going to go over the steps to successfully pop open your Cherokee’s hood and access the engine compartment.

Read on to learn about these steps in detail and find answers to other related questions!

How to Open Jeep Cherokee Hood (Steps)

Here are the 4 steps you need to follow to open your Jeep Cherokee’s hood:

You also shouldn’t miss these other top picks in this category:

1. Find the hood latch

To get started, you’ll need to locate the hood latch on your Jeep Cherokee and pull it. The location of the hood latch can vary depending on the manufacturer and model of the vehicle. On a Jeep Cherokee, the latch is typically found toward the left of the steering wheel at the bottom of the dash.

2. Pull the latch

Once you have located the latch, pull it to open the hood. Pulling the hood latch doesn’t fully open the hood; you also have to find the hood release and pull that too to open the hood fully.

3. Locate the hood release and pull it

After the hood has partially opened, you’ll need to come out of your Jeep Cherokee and head over to the front. Underneath the driver’s side of the hood, you’ll find the hood release which, when pulled, will allow you to completely open the hood and reveal the engine compartment.

4. Pop open the hood

Pull the hood release and pop open the hood. That’s it! You can now successfully access the engine compartment of your Jeep Cherokee!

For a visual walkthrough of the whole process, check out these 2 YouTube tutorials:

When Would You Need to Open Your Jeep Cherokee’s Hood?

Below is a list of some common reasons why you might need to pop open the hood of your Jeep Cherokee:

Checking the oil level 

To check the oil level of your vehicle, open up the hood and pull out the dipstick. Wipe it with a clean cloth and put it back into the tube to get a reading of the oil level. If the level is low, you may need to put in more oil.

Changing the fan belt 

The fan belt, located at the front of your Cherokee’s engine, is what drives the cooling fans and other related components in the engine compartment. If it is damaged or loose, you should get it replaced to prevent the engine from overheating.

Inspecting the battery 

Since the battery is a vital component of any vehicle, it should always be in good condition. You can inspect your Cherokee’s battery by opening the hood and ensuring the cables are properly connected and there’s no corrosion on the terminals.

Changing the air filter 

The air filter can be found on the driver’s side in the engine compartment and can be inspected by opening the hood and locating the air filter box. If the air filter is dirty or clogged, it can be replaced with a new one to ensure the engine performs efficiently.

Why Your Jeep Cherokee Hood Won’t Open

If your Jeep Cherokee’s hood refuses to open, there can be a number of issues with the locking mechanism behind it.

Perhaps the most common cause of the problem is a malfunctioning hood release lever. Another common issue can be a dislodged or broken release cable, caused by closing the hood too hard.

In any of these cases, getting a stuck hood open is typically a simple fix that you can do yourself. If, however, you’re unsuccessful in getting the hood open, taking your Jeep Cherokee to a mechanic is the best course of action.

Can the Hood on a Jeep Cherokee Be Changed?

Yes, the hood on your Jeep Cherokee can certainly be changed if you’re planning on switching the existing one with another one of your choice.

If you have prior experience and the right tools, you can remove the old hood and install the new one yourself. You’ll also need to ensure the hood release is fixed properly onto the new hood.

Check out this guide to learn more about replacing the hood of your Jeep Cherokee.

FAQs

Where is the latch on the Jeep Cherokee’s hood?

The hood latch on the Jeep Cherokee is located at the bottom of the dash, toward the left of the steering wheel.

Can you open a Jeep Cherokee hood with a broken release cable?

Yes, a Jeep Cherokee’s hood can be opened even if the release cable is broken. There are several ways to do this. You can try using a pair of nose pliers to pull the cable up enough to release the hood. If this doesn’t work, the headlights on your Cherokee need to be removed in order to open it up.

How much does it cost to replace the hood latch?

If the hood latch on your Jeep Cherokee needs to be replaced, you can expect to pay between $100 and $200 on average to get it fixed by a mechanic. This range includes the cost of the latch itself as well as labor expenses. The latch itself costs about $50 to $80. Essentially, the cost of the repair primarily depends on the make and model of your vehicle.

How much does it cost to replace the hood release cable?

Replacing the hood release cable on your Jeep Cherokee can cost you between $100 and $150 on average. This includes the price for the cable (between $50 and $60) and labor expenses.

Final Thoughts

So, how to open up your Jeep Cherokee’s hood? In this guide, we described the 4 steps to follow to open up your Jeep Cherokee’s hood. The process is simple and straightforward and can be done within a few minutes. If, however, you’re unable to pop open the hood, it’s better to take your vehicle to a mechanic to diagnose and fix the problem behind it.

Leave a Comment

Your email address will not be published. Required fields are marked *